Shop Water Treatment Products
Canton Water Softeners & Filters
Deals
Don’t Miss Out
What’s In Your Canton Water?
Get a FREE Water Test!
- No mailing — fast results!
- Test any tap in your home
- NEW flexible sample pickup options
Frequently Asked Questions for Water in Canton, Ohio
Is Canton tap water safe to drink?
Yes. Canton’s municipal drinking water meets all EPA and Ohio EPA drinking water standards and has no current violations requiring residents to use bottled water or boil advisories. Like most municipal systems, small amounts of regulated contaminants are present at levels considered safe by law, though some exceed more conservative health-based guidelines used by independent organizations.
Is Canton’s water hard?
Yes. Canton’s water is considered hard to very hard, with hardness primarily caused by naturally occurring calcium and magnesium.
Typical hardness levels reported for Canton range from 250–350 mg/L (approximately 15–20+ grains per gallon).
Hard water commonly causes scale buildup, reduced soap effectiveness, and increased wear on plumbing and appliances.
Does Canton’s water contain PFAS (“Forever Chemicals”)?
Canton has participated in EPA-required PFAS monitoring, including UCMR testing. PFAS compounds (such as PFOA and PFOS) have been detected in Ohio water systems, and utilities like Canton continue monitoring and planning treatment strategies as new EPA PFAS limits are phased in.
Because PFAS levels can vary by source and over time, many residents choose reverse osmosis or advanced carbon filtration for drinking water as an added precaution.
Does Canton add fluoride to its water?
Yes. Canton adds fluoride to its drinking water for dental health.
Fluoride levels typically average ~0.7–1.0 ppm, which is within EPA guidelines and consistent with recommended community fluoridation levels.
What other contaminants are in Canton’s water?
Based on recent Consumer Confidence Reports and routine monitoring, Canton’s water contains trace levels of common municipal water contaminants — all within EPA limits:
Inorganic contaminants:
- Arsenic: typically ~1–3 ppb (EPA limit: 10 ppb)
- Barium: typically ~0.02–0.05 ppm (EPA limit: 2 ppm)
- Nitrate: typically <1 ppm (EPA limit: 10 ppm)
Disinfection byproducts (from chlorination):
- Total Trihalomethanes (TTHMs): typically ~40–60 ppb (EPA limit: 80 ppb)
- Haloacetic Acids (HAA5): typically ~30–45 ppb (EPA limit: 60 ppb)
These compounds form when disinfectants interact with natural organic matter in source water. While legally compliant, they are a common reason homeowners explore additional filtration. than ideal.
Where does Canton get its water?
Canton’s drinking water is supplied by the City of Canton Water Department and primarily sourced from surface water reservoirs in the Nimishillen Creek watershed. Water is treated at municipal facilities before being distributed to homes and businesses.
What is the pH level of Canton water?
Canton’s water typically falls within a neutral to slightly alkaline range, generally around 7.2–7.8 pH, which supports corrosion control, system stability, and acceptable taste.
Should I use a water filter or softener in Canton?
Yes. Because of very hard water and the presence of trace contaminants, many Canton homeowners benefit from water treatment systems such as:
- Water softeners to reduce scale and protect plumbing and appliances
- Whole-house carbon filters to reduce chlorine and disinfection byproducts
- Reverse osmosis systems for cleaner, better-tasting drinking and cooking water
Does Canton water have a high total dissolved solids (TDS) level?
Total dissolved solids (TDS) measure the combined minerals and dissolved substances in water. While Canton does not always publish a single TDS value, municipal water is generally below the EPA’s secondary guideline of 500 ppm, which is typical for freshwater public systems.
In hard-water areas like Canton, dissolved minerals contribute to mineral taste, residue, and scale buildup on fixtures, pipes, and appliances. Even at compliant levels, many homeowners choose filtration or RO systems to reduce TDS for better taste and long-term appliance protection.
Where can I get a local water quality report?
Canton’s most recent Consumer Confidence Report (CCR) and water quality data are available on the City of Canton Water Department website under public water quality reports – link.
The Proof
Why Do Canton
Homeowners LOVE Us?
Now, after installation and using it for a week, my entire Culligan Water system is FAR EXCEEDING my expectations.
I had emailed a service call request and within a couple of hours a technician was on site and even had a replacement unit with him so that there was no disruption to patient care. I highly recommend this company!
Matt came yesterday to do our yearly check and he a pro! Called and let me know he was 10 minutes away, very polite, efficient, and obviously takes pride in his work. The ladies in the office are always so nice when I call in as well! 5 stars!!
Facebook