Shop Water Treatment Products
Alliance Water Softeners & Filters
Deals
Don’t Miss Out
What’s In Your Alliance Water?
Get a FREE Water Test!
- No mailing — fast results!
- Test any tap in your home
- NEW flexible sample pickup options
Frequently Asked Questions for Water in Alliance, Ohio
Is Alliance tap water safe to drink?
Yes. Alliance’s municipal drinking water meets all EPA and Ohio EPA drinking water standards and has no current violations requiring bottled water or boil advisories. As with all public water systems, small amounts of regulated contaminants may be present but remain within legal limits.
Is Alliance water hard?
Yes. Alliance’s water is considered moderately hard to hard, which is common throughout Stark County.
Typical hardness levels generally range from 120–200 mg/L (approximately 7–12 grains per gallon).
Hard water can lead to scale buildup on plumbing and fixtures, reduced soap effectiveness, and increased wear on appliances such as water heaters and dishwashers.
Does Alliance’s water contain PFAS (“Forever Chemicals”)?
While detailed PFAS results are not prominently listed in the Alliance Water Quality Report, PFAS compounds (such as PFOA and PFOS) have been detected in some Ohio water systems, and continued monitoring is required as new EPA PFAS standards take effect. Because PFAS levels can vary by source water and over time, many Alliance residents choose reverse osmosis or advanced carbon filtration for drinking and cooking water as an added precaution.
Does Alliance add fluoride to its water?
Yes. Alliance’s drinking water contains fluoride to support dental health. Recent testing shows levels around 1.07 ppm, which is below the maximum contaminant level of 4 ppm.
Fluoride levels are typically maintained around 0.7 ppm, which aligns with EPA and public health recommendations for community water fluoridation.
What other contaminants are in Alliance’s water?
Based on recent Consumer Confidence Reports from the regional supply and routine monitoring, Alliance’s water may contain trace levels of common municipal contaminants.
Inorganic contaminants:
- Chlorite: 0.42 ppm
- Barium: 0.02 ppm
- Nitrate: 0.49 ppm
Disinfection byproducts (from chlorination):
- Total Trihalomethanes (TTHMs): typically ~45–60 ppb (EPA limit: 80 ppb)
- Haloacetic Acids (HAA5): typically ~30–45 ppb (EPA limit: 60 ppb)
These byproducts form when chlorine interacts with naturally occurring organic matter. While levels are legally compliant, they are often cited by independent health organizations as a reason homeowners explore additional filtration.
Where does Alliance get its water?
Alliance’s water comes primarily from Deer Creek and Walborn Reservoirs, which are surface water sources. A secondary backup source is the Mahoning River, although it has not been used in recent years. Water is treated at the city’s treatment plant using advanced processes before distribution.
What is the pH level of Alliance water?
While Alliance’s specific pH values are not listed in the report, neutral to slightly alkaline pH ranges common in Northeast Ohio fall around 7.2–7.7, which supports corrosion control, distribution system stability, and acceptable taste.
Should I use a water filter or softener in Alliance?
Yes. Due to hard water and trace disinfection byproducts, many Alliance homeowners benefit from water treatment systems such as:
- Water softeners to reduce scale and protect plumbing and appliances
- Whole-house carbon filtration to reduce chlorine taste and odor
- Reverse osmosis systems for cleaner, better-tasting drinking and cooking water
Does Alliance water have a high total dissolved solids (TDS) level?
Total dissolved solids (TDS) measure the combined minerals and dissolved substances in water. Alliance’s water is generally below the EPA’s secondary (aesthetic) guideline of 500 ppm, which is typical for freshwater municipal supplies.
Even at compliant levels, dissolved minerals contribute to taste differences, mineral residue, and scale buildup, especially in homes with hard water. Many Alliance residents choose filtration or RO systems to reduce TDS for better taste and long-term appliance protection.
Where can I get a local water quality report?
Alliance’s annual Consumer Confidence Report (CCR) is available through the City of Alliance Ohio Water System.
The Proof
Why Do Alliance
Homeowners LOVE Us?
Honestly, I thought this would just help with some buildup, but the difference is everywhere. It’s one of those upgrades you don’t think about until you have it.
We always assumed the spots on dishes, the stiff laundry, and the constant cleaning were just part of living here. After getting the system, all of that basically disappeared.
They didn’t rush through anything. Everything was clean, organized, and explained in a way that actually made sense. You can tell they take pride in the work, which made us feel confident we made the right choice.
Facebook